Jumbo Roll Folding Facial Tissue Production Line / Tissue Paper Packing Machine
Description
Servo Motor Facial Tissue Paper Production Line With Packing Machine has the advantages of simple operation,high production efficiency, and keeping the consistent of the finished products, with the fully automatic production, the amount of production labour can be reduce, so to save the production and managing cost greatly.It converts the jumbo roll into folded facial tissue paper. The whole line work smoothly and run stable, saving the labor cost. It’s best choice for the producing facial tissue paper.
Specification
FOLDING SYSTEM
| Jumbo roll width | 2900mm |
| Unfolded size | 190/200±2mm |
| Folded size | 95/100±2mm |
| Design speed | 170m/min |
| Production speed | 140m/min(depend on size) |
| Jumbo roll diameter | ≤1500-3000mm(other size to order) |
| Unwinding stand | 2~6ply,individual driving(to order) |
| Folding system | Vacuum suction folding |
| Folding type | V fold interfold |
| Cutting system | Upper knife fix, bottom knife rotating |
TRANSFER SYSTEM
| Transfer structure | Servo control,auto transfer |
| Counting | Setting on LCD,auto count and transfer |
| Counting model | 100~250sheet |
| Transfer speed | ≤7times/min |
| Finished products set | Automatic |
| Overturn system | Automatic |
| Flatting system | Automatic |
ACCUMULATOR
| Storage | 160PCS |
| Max unload speed | 15PCS/min |
| Power | 4.4KW |
CUTTING SYSTEM
| Cutter model | FC150-2L | FC200-2L |
| Speed | 150cuts/min | 200cuts/min |
| Feeding line | Double lines |
| Grinding system | Pneumatic grinding,parameter can be set on control panel |
| Grinding feed | Automatic feeding grinding for circular blade |
| Circular blade size | Φ610mm |
| Cutting length | Set on control panel,tolerance≤±1mm |
| Cutting vertical tolerance | Tolerance≤±1mm |
| Cutting length tolerance for two ends | Set on control panel |
Main Specification
1. equipped with steel to steel or steel to rubber embossing roller, pneumatically separating.
2 . pneumatic jumbo roll loading, pneumatic paper driving, stepless speed additionustment, and web tension control.
3 . equipped with Roots Type vacuum pump for stable running of the machine.
4 . pneumatic dot slititng and full slitting are available to make various products width.
5 . equipped with edge embossing device to keep the plies together
6 . jumbo roll guiding system available.
7 . the machine will stop when the paper borken, it avoid waste caused by no paper or paper broken.
8 . the web can be threaded on the machine by the two jug buttons, it's more safety and easier to thread the web.
9. Key part regularly lubricating automatically.
10. the facial tissue log saw cutting machine is an orbital saw machine specially designed for inter-fold products, as inter-fold facial tissues and inter- fold toilet tissue,etc, this facial tissue log saw cutitng machine has been built with the latest technology on the electronic and servo drive system, toincrease the stability and quality of the cuts.
11. the folded facial tissue can be feed into the packing machine by the conveyor, and then packing automatically.
Electrical Parts and other Parts brand
| NO | Name | Brand | Original Place |
| 1 | Motor | Siemens | China |
| 2 | Pneumatic Parts | Omron | Germany |
| 3 | Vacuum Pump | Longtech | Taiwai |
| 3 | Frequency converter | Delta | Taiwai |
Product Description
High Quality Facial Tissue Machine Paper Product Making Machinery
Features:
Facial tissue making machine working flow:The jumbo rolls which have been slit into the desired width are cut by the slitting cylinders,and then interfolded into interoverlapped rectangular facial tissue sheets.
This machine adopts independent servo motor drive,and automatic paper tension control automatic marking functings.It featurse of high speed,nice folding and easy operation.
1.Can order steel to rubber embossing rolls,pneumatically separated.
2.Wallboard rack and Machine running stability and extremely good and fast.
3.Pneumatic jumbo roll loading,pneumatic paper driving,stepless speed additionstment,and web tension control.
4.Equipped with roots type vacuum pump for stable running of the machine.
5.Make various products width as requirement.
6.Equipped with edge embossing unit to keep the plise together.
7.The machine will stop when the paper broken.It avoid waste caused by no paper or paper broken.
8.The web can be threaded on the machine by the two jog buttons,It's more safer and easier to thread the web.
1. Specification of Facial Tissue Folding Machine:
| Machine Model | SYM-190/6L (Other size to be specified) |
| Finished Products Unfolded Size | 95x(120-210)x2mm |
| Folding Products Size | 190x(120-210)x2mm |
| Raw Material Width | 1260mm |
| Raw Material Diameter | 1200mm |
| Raw Material Core Diameter | 76.2mm |
| Output Capacity (8 hours) | 2000-3000kg |
| Embossing Unit | Steel to rubber |
| Edge Embossing | Steel to steel edge embossing, independent pneumatic regulation |
| Slitting Unit | Pneumatic slitting |
| Main Servo Moter Power | 5.5kw |
| Unwind Frequency Motor Power | 1.5kw (2 units) |
| Vacuum System | 18.5 kw Vacuum pump (Taiwan Roots blower) |
| Pneumatic System | 3HP air compressor,Min. pressure 5kg/cm2PA (Provider by user themselves) |
| Driving System | Timing belt |
| Dimension | 5870x2800x2207mm |
| Weight | About 5 tons |
2. Specification of Single Channel Log Saw Cutting Machine:
| Designation | Parameter values |
| The length of the none cut off facial tissue | minimum 500mm |
| The Height of tissue | 30~130mm |
| Machine Speed | 20~150cut/min |
| Operating speed | 20~120cut/min |
| Round blade outer diamete | Φ610mm |
| Paper cutting circular knife top speed | 980R/min |
| Finished products specification | 70~300mm |
| Paper width | 70~110mm |
| Cutting Length | 70~300mm |
| Left-over Length | 20~65mm |
| Power | 11KW |
| Power supply | 380V 50Hz |
| Air source | 0.5~0.8MPa |
| Machine Size | 4600*1700*2500mm |
| Weight of machine | 2300~2600kg |
| Brake | Parameter setting (auto/manual) |
| Stepping sharpening knife | Parameter setting (auto) |
| Pneumatic sharpening knife | Parameter setting (auto/manual) |
| Blow air | without |
| The total pressure switch | Value (not) |
| Human-computer interface | DELTA |
| Frequency changer | |
| Servo Drive | DELTA |
3. Specification of Facial Tissue Packing Machine:
1. Adopting packing way by wrapping, folding and sealing with compact structure, it makes the package look beautiful and the seal tightened.
2. Controlled by stepless speed regulation, touch screen and PLC, the display on the human-machine interface makes maintenance more simply.
3. Applied with auto-arranging feeding conveyor, it is convenient to connect the conveyor with automatic production line, saving the labor cost to the maximum.
4. It saves much packing material by means of photocell checking, servo tracking, and auto-stop of film feeding without product.
5. High automation, high profession, high efficiency and less trouble.
6. With wide packing size range, various packing sizes can be quickly interchanged.
| Tissue sizes: | L: 150-400mm W: 150-200mm H: 35-150mm |
| Packing speed: | 40-70 bags/min |
| Air supply: | 0.5-0.8MPa |
| Machine weight: | 3300kg |
| Outer dimensions (LxWxH): | 5885x3560x1925(mm) |
| Heating power: | 3.6kw |
| Motor power: | 3.6kw |
| Packing size: | ≤230x190x100(mm) |
| Working noise: | ≤78dB |
| Packing film: | CPP |
| Power supply type: | 380V, 50Hz |
4.Specifications of Semi Automatic Two Outlets Multi Bags Packing Machine:
| Packing Size | ≤500x300x110mm (LxWxH) |
| ≥220x120x90mm (LxWxH) |
| Packing Speed | 10-20 bag/min |
| Gas Pressure | 0.5mpa-0.8mpa |
| Voltage & Frequency | 380V,50Hz,3Phase |
| Total Power | 0.8kw |
| Weight | 1000kg |
| Overall Dimension | 4900x1650x1280mm |
| Tissue paper bag (one row/two rows) | Tissue paper bag (one row/two rows) |
Packing & Delivery
Our Company
