Soft Pack Facial Tissue Machine 300meter Per Min with Embossing Printing
Description
Soft Pack Facial Tissue Machine Embossing Printing with 300meter Per Min is with embossment, folding, counting ,match with high-speed paper cutting machine, convey, automatic boxed and automatic sealing box in one body. This equipment adopt PLC, frequency control and equip with touch type multi-picture man and computer interface operation system. Adopt synchronization belt driving, speed-change machine driving for complete machine, which make the machine can suitable for various kind of raw material’s requirement , and improve the quality and efficiency. The operation flow of this production line is easy, high production efficiency and made perfect production. This production reduce the production operation and packaging person which save the expense of production and management.
Specification
| Electric source | 380V, 50Hz, 3 ph |
| Total power | 22 KW |
| Line NO. | 6 lines |
| Product size (cutting length) | 210 mm |
| Product cutting width | Could be changed by adjusting slitting knifes regarding yours specification |
| Production folding size | 105mm x196 mm (L x W) |
| Production capacity | 80-100m/min |
| Paper layer | 2 layers ,13 GSM to 14.5 GSM/ layer |
| diameter of jumbo roll | 1800 mm |
| Printing color | 2 sets printing unit one color independent with servo motor Siemens |
| Base paper width | 1176mm |
| Unwinding stand | It can handle 180cm, the weight is about 700kg independent with AC motor Siemens and equipped with automatic tension control |
| Vacuum cylinder | 1240mm |
| Embossing unit | Two sets of embossing unit steel to rubber (design will send by email ) independent with servo motor Siemens |
| Slitting knifes | 7 pieces |
| Perfume unit | Spray way on machine |
| Outside dimensions | 10300mmx 2300mmx 2600mm (L x W x H) |
| Weight | About 9800 kg |
Main Specification
- Jumbo roll stands: 2 ,with pneumatic type wide belt to convey paper,each jumbo roll has independent tension adjustor and left-right adjusting device.
- Pneumatic lifting jumbo roll to reduce the labor strength.
- Auto stop when paper breaks to decrease the waste of paper
- Can fold different width of finished products : flexible vertical cutting device can adjust the cutting width between 100-210mm freely.
- Can equip with embossing unit and edge embossing unit.
- Roots vacuum bump absorbing system with strong suction,negative pressure is stable.
Electrical Parts and other Parts brand
| NO | Name | Brand | Original Place |
| 1 | Motor | Siemens | China |
| 2 | Pneumatic Parts | Omron | Germany |
| 3 | Vacuum Pump | Longtech | Taiwai |
| 3 | Frequency converter | Delta | Taiwai |
Product Description
High Quality Facial Tissue Machine Paper Product Making Machinery
Features:
Facial tissue making machine working flow:The jumbo rolls which have been slit into the desired width are cut by the slitting cylinders,and then interfolded into interoverlapped rectangular facial tissue sheets.
This machine adopts independent servo motor drive,and automatic paper tension control automatic marking functings.It featurse of high speed,nice folding and easy operation.
1.Can order steel to rubber embossing rolls,pneumatically separated.
2.Wallboard rack and Machine running stability and extremely good and fast.
3.Pneumatic jumbo roll loading,pneumatic paper driving,stepless speed additionstment,and web tension control.
4.Equipped with roots type vacuum pump for stable running of the machine.
5.Make various products width as requirement.
6.Equipped with edge embossing unit to keep the plise together.
7.The machine will stop when the paper broken.It avoid waste caused by no paper or paper broken.
8.The web can be threaded on the machine by the two jog buttons,It's more safer and easier to thread the web.
1. Specification of Facial Tissue Folding Machine:
| Machine Model | SYM-190/6L (Other size to be specified) |
| Finished Products Unfolded Size | 95x(120-210)x2mm |
| Folding Products Size | 190x(120-210)x2mm |
| Raw Material Width | 1260mm |
| Raw Material Diameter | 1200mm |
| Raw Material Core Diameter | 76.2mm |
| Output Capacity (8 hours) | 2000-3000kg |
| Embossing Unit | Steel to rubber |
| Edge Embossing | Steel to steel edge embossing, independent pneumatic regulation |
| Slitting Unit | Pneumatic slitting |
| Main Servo Moter Power | 5.5kw |
| Unwind Frequency Motor Power | 1.5kw (2 units) |
| Vacuum System | 18.5 kw Vacuum pump (Taiwan Roots blower) |
| Pneumatic System | 3HP air compressor,Min. pressure 5kg/cm2PA (Provider by user themselves) |
| Driving System | Timing belt |
| Dimension | 5870x2800x2207mm |
| Weight | About 5 tons |
2. Specification of Single Channel Log Saw Cutting Machine:
| Designation | Parameter values |
| The length of the none cut off facial tissue | minimum 500mm |
| The Height of tissue | 30~130mm |
| Machine Speed | 20~150cut/min |
| Operating speed | 20~120cut/min |
| Round blade outer diamete | Φ610mm |
| Paper cutting circular knife top speed | 980R/min |
| Finished products specification | 70~300mm |
| Paper width | 70~110mm |
| Cutting Length | 70~300mm |
| Left-over Length | 20~65mm |
| Power | 11KW |
| Power supply | 380V 50Hz |
| Air source | 0.5~0.8MPa |
| Machine Size | 4600*1700*2500mm |
| Weight of machine | 2300~2600kg |
| Brake | Parameter setting (auto/manual) |
| Stepping sharpening knife | Parameter setting (auto) |
| Pneumatic sharpening knife | Parameter setting (auto/manual) |
| Blow air | without |
| The total pressure switch | Value (not) |
| Human-computer interface | DELTA |
| Frequency changer | |
| Servo Drive | DELTA |
3. Specification of Facial Tissue Packing Machine:
1. Adopting packing way by wrapping, folding and sealing with compact structure, it makes the package look beautiful and the seal tightened.
2. Controlled by stepless speed regulation, touch screen and PLC, the display on the human-machine interface makes maintenance more simply.
3. Applied with auto-arranging feeding conveyor, it is convenient to connect the conveyor with automatic production line, saving the labor cost to the maximum.
4. It saves much packing material by means of photocell checking, servo tracking, and auto-stop of film feeding without product.
5. High automation, high profession, high efficiency and less trouble.
6. With wide packing size range, various packing sizes can be quickly interchanged.
| Tissue sizes: | L: 150-400mm W: 150-200mm H: 35-150mm |
| Packing speed: | 40-70 bags/min |
| Air supply: | 0.5-0.8MPa |
| Machine weight: | 3300kg |
| Outer dimensions (LxWxH): | 5885x3560x1925(mm) |
| Heating power: | 3.6kw |
| Motor power: | 3.6kw |
| Packing size: | ≤230x190x100(mm) |
| Working noise: | ≤78dB |
| Packing film: | CPP |
| Power supply type: | 380V, 50Hz |
4.Specifications of Semi Automatic Two Outlets Multi Bags Packing Machine:
| Packing Size | ≤500x300x110mm (LxWxH) |
| ≥220x120x90mm (LxWxH) |
| Packing Speed | 10-20 bag/min |
| Gas Pressure | 0.5mpa-0.8mpa |
| Voltage & Frequency | 380V,50Hz,3Phase |
| Total Power | 0.8kw |
| Weight | 1000kg |
| Overall Dimension | 4900x1650x1280mm |
| Tissue paper bag (one row/two rows) | Tissue paper bag (one row/two rows) |
Packing & Delivery
Our Company
SYM Shenzhen Yushengda Machinery & Engineering CO.,LTD
SYM SHENZHEN YUSHENGDA MACHINERY & ENGINEERING CO.,LTD, is emerging as a global leader in tissue converting and packing
machinery, backed by experience in machine design, manufacturing,
and service, we are uniquely equipped to provide our customers with
a wide range of innovative solutions. The range of tissue
converting machinery:
- SYM FOLD Conversion Range
- Napkin conversion. 1/4, 1/8, Dispenser Fold & Custom fold;
- Facial Tissue conversion. V fold interfold;
- Hand Towel conversion. V, Z, C & Multifold.
- SYM WIND Conversion Range
- Toilet Tissue & Kitchen Towel conversion rewinders;
- Industrial Roll conversion rewinders;
- SYM-Cut Log Saw for roll products.
- SYM MATIC Range
- Automatic Packing machines;
- Automation & Product Handling solutions.
Our commitment is to bring significant enhancements in our
productivity and responsiveness to the market, while improving the
quality of products and services we offer to our customers. We lead
new research and development ideas in the tissue market.
We at SYM deliver the best installation, start-up, training, and
maintenance performed by a team of highly trained service
technicians
We will aspire to keep on exploring and enterprising, with
high-class products and high quality services creating more value
for our customers, creating a brighter future together.
Facial tissue Production Line
Packing & Delivery
Our Company
Toilet Paper Production Line
Deco Color Lamination Parts:
